Christmas offer: 10% off all installations when you sign your order by 31 January 2027.See the offer

Roof lanterns & rooflights

Roof lanterns that bring daylight into the middle of the room.

Roof lanterns and flat rooflights for flat-roofed extensions, kitchens and garden rooms, planned around the room beneath them.

A wall window lights the edge of a room. A roof lantern lights the middle of it.

Single-storey extensions are often deep, and the back of the room can end up the darkest part of the house. Light from above reaches into the middle of a deep room in a way a window in the wall can't, so a lantern or rooflight over the kitchen table or the centre of an open-plan space changes how the whole room feels.

We plan the lantern around the room beneath it: where it sits over the furniture, how it lines up with the doors and windows below, and how the frame looks from inside when you look up.

What we make them in.

Aluminium

Slim, powder-coated aluminium frames for the most glass and the thinnest bars, in a colour chosen to suit the room.

uPVC

A uPVC frame in white or a foiled colour, where it matches the windows and doors around it.

01 · Lantern

Rectangular Lantern

A pitched glazed lantern with hipped ends, sitting on an upstand on a flat roof. The classic choice over a kitchen-diner or a long single-storey extension, where it runs along the length of the room and draws the eye up.

  • Hipped ends, sized to the room below.
  • Lined up with the doors and windows beneath it.
  • Fixed, or with opening vents for ventilation.

Best for: Kitchen-diners, long rear extensions and garden rooms with a flat roof.

02 · Pyramid

Square Lantern

Four glazed faces rising to a central point. A square lantern suits a square room, or sits centred over a dining table or a kitchen island, where a long lantern would look out of place.

  • Four equal faces rising to a point.
  • Centred over the table, the island or the middle of the room.
  • A strong feature in a square or near-square room.

Best for: Square rooms, dining areas and kitchen islands.

03 · Flat

Flat Rooflight

A single glazed panel set close to the roof, laid to a slight fall so the rain runs off. Quieter on the roofline than a lantern, and a good choice where a lantern would be seen from upstairs windows, above a parapet or from the street.

  • A plain glazed panel, with little frame to see from inside.
  • Low on the roof, so it barely shows from outside.
  • Single panels, or several in a row along a long room.

Best for: Flat-roofed extensions where you want the light without a feature on the roof.

Not sure which style suits your house?

We'll talk it through at a free home visit, then send you an itemised written quote.

On an existing roof, or a new extension?

It changes the paperwork. Replacing an existing rooflight in an existing home is within the scope of our Certass registration, which covers replacement windows, doors, roof lights and roof windows, so we register the work and Certass issues your Building Regulations Compliance Certificate. If you're replacing an existing lantern, we'll confirm at the survey whether it can be registered the same way. A lantern or rooflight in a new opening, or on a new extension, is new building work: it generally needs building regulations approval through building control, and Certass self-certification doesn't cover it. We'll tell you at the home visit which applies to yours.

Planning a conservatory or garden room?

A solid roof with rooflights, or a lantern set into it, gives a conservatory or garden room the light of a glass roof in a room that holds its heat. See the conservatory styles we build.

Up to 10-year guaranteeReplacement rooflights are registered with Certass.See what's covered
Certass registered

Where we fit roof lanterns.

We’re based in Hemel Hempstead and cover Hertfordshire, Buckinghamshire, Bedfordshire and North London. Each town page covers the local housing and what the council asks for.

All the areas we cover

Questions, answered.

What's the difference between a roof lantern and a flat rooflight?

A roof lantern is a glazed structure that rises above the roof, usually with sloping glass on all sides and a ridge or a point at the top. A flat rooflight is a single glazed panel set close to the roof, laid to a slight fall so the rain runs off.

A lantern adds height inside and makes a feature of the ceiling. A flat rooflight is quieter on the roofline, and suits a room where you want the light without the lantern being seen from upstairs windows or the street.

Do I need planning permission for a roof lantern?

It depends on the roof and the house. The permitted development rules for roof alterations say a rooflight mustn't project more than 150 millimetres from the plane of the roof slope, or rise above the highest part of the roof. A lantern stands well proud of the roof, so check with your council before you commit, especially in a conservation area or on a listed building.

If the lantern is part of a new extension, it's assessed as part of the extension. The Planning Portal's roof guide has the detail.

Does a roof lantern need building regulations approval?

A new one usually does. The Planning Portal says approval will generally be needed for a new rooflight, because the roof structure usually has to be altered to make the opening. That means a building control application, and it's separate from anything we register.

Replacing an existing rooflight in an existing home is different: it's within the scope of our Certass registration, so we register the work and Certass issues the Building Regulations Compliance Certificate. If you're replacing an existing lantern, we'll confirm at the survey which route applies.

How energy-efficient does a rooflight have to be?

For a new or replacement rooflight in an existing home, Approved Document L sets a maximum U-value of 2.2 W/m²K (Table 4.2). The lower the U-value, the less heat escapes through it. Glass choice also affects how warm the room feels in summer, so we'll talk through solar-control options for a south-facing roof.

Can you replace an old lantern that leaks or has misted?

We don't repair lanterns. If the glass has misted between the panes or a seal has failed, a glazing repair specialist may be able to replace the affected panel. If the frame is tired, the lantern leaks at the joints, or you'd like a better-insulated or better-looking one, we can quote to replace it. Water coming in around the base of a lantern can be a roofing problem rather than a lantern problem, so it's worth having the roof checked too.

Where should a roof lantern go?

Over the part of the room where you want the light: usually the kitchen island, the dining table or the middle of an open-plan space, rather than tight against a wall. We line it up with the doors and windows below so the room reads as one design, and size it to the room.

Book a home visit.

Book a home visit and we'll talk through your project at your house — no call centre, no hard sell. You'll get an itemised written quote, and an up to 10-year written guarantee.